TOSHlBA~-q
LIQUID CRYSTAL DISPLAY (continued)
13) CO Line Number
1) Incoming Call
2) When call is
answered, display
shifts to the
right.
I
1
1
c-31
3) Outgoing
C) Dialed Number
1) CO Line
2) Intercom Line
D
Incoming CO call
-
if your EKT
is programmed for incoming
ringing on that CO line.
Transferred CO call
-
CO line is
transferred in the ringing state
by another station.
Camped-on CO call
-
CO line
was camped-on your busy EKT
and rings in when EKT is idle.
Hold recall
-
automatic recall of
a line on hold.
Trunk Queuing
-
when a line is
being offered by the trunk
queuing feature.
Outgoing CO line call
-
when a
CO line is selected prior to
dialing. This display will be re-
placed by the dialed number
when dialing commences.
The digits are displayed as a
number is dialed on a CO line
or Intercom using:
l
Manual Dialing
l Automatic Dialing
l
Repeat Last Number Dialed
l
Saved Number Redial
NOTES:
1.
If
the number was dialed on
a CO line, the display will
automa
tically
change from
Dialed Number to Elapsed
Time after a preselected per-
iod of time.
(continued)
To Next Page
Loading...
