~-TOSHIBA-~
LIQUID
CRYSTAL DISPLAY (continued)
2. On a CO line call, the dis-
play can be forced to change
from Dialed Number to Date/
Time by depressing the
i
(or
m
)
key and then to
the Elaosed Time
dis&av
bv
anothe;
depression
oi
the
a/
m
key. Repeated
i
/
m
key depressions will then
alternate the display between
Date/Time and Elapsed Time.
D)
Elapsed Time Displayed during an active in-
(
coming or outgoing CO line call.
After a preselected timeout, the
Elapsed Time display will appear
in place of the CO line number
(incoming call) or dialed number
(outgoing call). The time accu-
mulates from the moment the
m
key is first depressed. The
maximum call duration regis-
tered is 10 hours.
NOTE:
The display shows Elapsed Time
for 15 sec. after the call is ter-
minated and then changes
auto-
ma
tically
to Date/Time.
E)
Calling
Number-
Displayed during the following
Intercom
conditions:
/L-lQ
l Incoming intercom call when
your station is idle.
l Busy Override when your
sta-
tion is busy.
l Automatic Callback-Intercom.
l Door Phone.
l Call Pick-up.
l DSS key call.
(continued)
36
To Next Page
Loading...
