Stratagy iES32 Installation Guide
Step 9: Install Stratagy ES Administration Software on PC
Stratagy iES32 Installation Guide 06/02 9
Step 9: Install Stratagy ES Administration
Software on PC
The Stratagy ES Administration can be loaded on a PC with network access to Stratagy ES.
Minimum requirements for the PC are:
• Windows 2000, Windows NT 4.0 or Windows 98
• 64MB RAM
• Pentium processor
• 20MB of free hard disk storage
• CD-ROM drive (optional)
• 38400 baud modem (optional for remote maintenance through telephone network)
• 3.5” 1.44MB floppy disk drive
• VGA color monitor
• mouse
• keyboard
• 10BaseT Network Interface Card (optional for remote connection through a LAN/Wide Area
Network (WAN))
➤ To install Stratagy Administration Software
1. Insert the CD-ROM Disk into the PC drive. The Software Menu displays.
2. Select Stratagy ES Administration. The Welcome screen displays.
3. Accept the defaults on the following screens by clicking Next.
4. When the installation is complete, click Finish.
5. Restart the Stratagy ES Server.
6. Remove the CD-ROM from the drive.
Step 10: Connect Stratagy Administration PC to
Stratagy iES32
The iES32 requires Stratagy Admin software, installed on a separate IBM-compatible Stratagy
Admin PC for local (shown below) or remote administration and maintenance. See “Crossover
Network cable” diagram on page 6.
Step 11: Program Mailboxes
➤ Program the User mailboxes for the customer’s application. See Chapter 6 – Messaging Voice
Processing (MVP) in the Stratagy ES I&M Manual for detailed instructions.
To Next Page
Loading...
