Toshiba T1200 - 4.3 Disconnecting the Top Cover Assembly

4.3 DISC(BNBC'lIRG !'lIB TOP COVBR ASSBllBLY
1.
Confirm that the POWER switch is off.
2. Remove the top cover assembly
as directed in part 4.2.
3.
Lift the
keyboard unit
(A)
out
and place
it in front of
the
unit.
4. Disconnect the LCD cable
( B)
from the system
PCB
(C) •
(A)
FIGURE 4-7 Disconnecting the Top Cover Assembly
5. To install a new top cover assembly, follow the above
procedures in reverse.
4-5