Toshiba T1200 - 1.9 Built-in Modem

1. 9 BOILT- IR MOD!II
The built-in modem is connected to the connector that is used
exclusively for this system PCB. Note that the system PCB is
originally provided with this modem. This modem can operate in
only one communication mode, the BELL 103/212 communication.
T~e specifications are as following table.
FIGURE 1-9 Built-in Modem
TABLE 1-7 Built-in Modem Specifications
Item Specification
Data Format
Low
Speed (300 BPS)
7 or 8 bits, 1 or 2 stop bits odd,
even or no parity.
High
Speed (1200 BPS) 7 bits, no parity, 2 stop bits
7 bits,
e/o parity, 1 stop bit
8 bits, no parity, 1 stop bit
Dialing Capability
Tone Diall Pulse Dial
Audio Monitor Speaker
Receive Sensitivity -4SdBm
1-12