Toshiba T1200 - 4.15 Removing;Replacing the LCD Module

4.15 RBIIOVDG/RBPLACDG ftB LCD IIODULB
1. Confirm that the POWER switch is off.
2. Remove the LCD mask from the LCD cover subassembly as
directed in part 4.14.
3. Remove the four screws (A) on the
(B) •
FIGURE 4-23 Removing the LCD Screws
4. Disconnect the LCD cable (C) from the LCD module.
FIGURE 4-24 Removing and Disconnecting the LCD Module
5. To install a new LCD module, follow the above procedures in
reverse.
4-21