Toshiba T1200 - 4.16 Removing the LCD Cover Subassembly

4.16 RBIIOVING i'IIB LCD COVER SOBASSBllBLY
1. Confirm that the POWER switch is off.
2. Remove the LCD mask and LCD cover subassembly as directed in
parts 4.14 and 4.15.
3. Using tweezers or a fine-pointed instrument, peel off the
hinge label (A) and remove the two screws (B) that it
conceals. Keep the label in a clean place.
FIGURE 4-25 Removing the LCD Cover Subassembly Screws
4-22