Toshiba T1200 - Procedure 2: Power Supply Indicator Check

PROCBDURB 2
Power Supply Indicator Check
1. Turn the POWER switch on.
2. Plug the ac adapter into an electrical outlet and the DC IN
l2V jack.
3. If the Power Supply indicator lights, its meaning depends on
its color and whether it blinks or not, as described below.
RED/CONTINUOUSLY LIT: Current is flowing; the ac adapter is
normal.
GREEN/CONTINUOUSLY LIT: Either the main
disconnected, or current flow has stopped
complete); the ac adapter is normal.
battery
(charging
is
is
RED/BLINKING: Current is not being supplied by the ac
adapter; the adapter must be replaced. If the indicator
still blinks after replacing the ac adapter, replace the
power supply PCB. (See part 4.8)
4. If the indicator does not light the ac adapter must be
replaced.
POWER SUPPLY INDICATOR
FIGURE 2-3 Power Supply Indicator
2-6