Toshiba T1200 - Procedure 3: Connector Check

PROCBDOllB 3
Connector Check
1. Turn the POWER switch off and disconnect the ac adapter from
the DC IN l2V ~ack.
2. Remove the top cover assembly. (Refer to part 4.2)
3. Lift the keyboard up and check that the keyboard cable is
connected securely to the system PCB. If it is connected
securely, go to PROCEDURE 4.
4. If it is not connected securely, reconnect it.
FIGURE 2-11 Keyboard Connector Check
2-34