4.3 Optional Memory Card
Removing an Optional Memory
card
To
remove an optional memory card from the T1900ff1900C, follow the steps below and
refer
to
Figure 4-2.
1.
Tum
off
the power
to
the T
1900ff
1900C, and,
if
attached, disconnect the AC
adapter, power cord and
all external cables connected
to
the
computer.
2.
Remove
the
battery pack as described
in
Section 4.2.
3.
Open
the
cover
to
the expansion memory slot.
4. Grasp the plastic tab and pull it so the card comes partially
out
of
the computer.
5.
Grasp the
optional
memory
card
and pull it completely out.
Optional
memory
card
Cover
Figure 4-2 Removing
the
Optional Memory Card
CAUTION: DO NOT touch
the
connecting edge
of
the
memory card Debris or
oil
in
or on
the
connector may
cause
memory access problems.
4-5
To Next Page
Loading...
