4-10
5. Open the expansion memory slot cover on the right side
of
the unit (Figure 4-6).
6.
Using a jeweler's screwdci¥er, remove the screw -cov-edocated abovethe-function--
--
-----
---
--
---
keys, then remove the
Ml.5xlO
screw (Figure 4-6).
NOTE: Be sure
to
use
the
co"ect screws
when
reassembling
the
top
cover.
7. Unsnap the latches securing the
top
cover to the base assembly. Start by pressing
on the front
of
the
top
cover just in front
of
the space bar and rotate the
keyboard's front edge toward you
to
release the
front
latches (Figure 4-6).
8.
Continue around the rim until
aU
latches are released, then carefully
lift
up the
top
cover (Figure 4-6).
NOTES: (1)
The
latch on
the
back left comer may
catch.
To
release this
latch,
gently Jiggle
the
cover back and forth
to
free it from
the
chassis.
(2)
As you
remove
the
top
cover,
the
RGB and PRT port protective
covers will fall
away
from
the
back
of
the
unit.
Screw
cover
Figure
4-6
Unlatching
the
Top
Cover
Expansion
memory
slot
cover
To Next Page
Loading...
