Installing the Top Cover
To
install the T1900ff1900C's
top
cover follow the steps below and refer
to
Figures 4-5 and
4-6.
1.
Place the
top
cover
on
the T1900ff1900C.
2.
Begin at the back and snap the
top
cover into place. Continue along the sides and
snap the front latches last (Figure 4-6).
3.
Secure the
Ml.5:dO
screw above the keyboard and replace the screw
cover
(Figure 4-6).
4. Close the display and set the
ROB and PRT port protective covers in place.
5.
Secure the
four
Ml.5x6
silver screws at the back
of
the unit (Figure 4-5).
6.
Install the optional PCMCIA card, optional memory card and battery pack as
described in
Sections 4.4, 4.3, and 4.2.
4-11
To Next Page
Loading...
