4.6 Keyboard
Removing the Keyboard
To remove the T1900ff1900C's keyboard, follow the steps below and refer to Figure 4-7.
4-12
I. Tum off the power to the T 1
900ffl
900C,
and,
if
attached, disconnect the
AC
adapter, power cord
and
all
external cables connected to the computer.
2.
Remove the battery pack, optional
memory
card, optional PCMCIA card
and
top
cover as described
in
Sections 4.2 through 4.5.
3.
Carefully lift up the keyboard to expose the keyboard connector.
4.
Disconnect the keyboard cable
from
pressure-plate connector PJ4 on the upper
system board and
set the keyboard
aside.
PJ4
Keyboard
cable
Figure 4-7 Removing
the
Keyboard
To Next Page
Loading...
