Installing the Display Mask
To install the T1900rr1900C's display mask, follow the steps below and refer to Figure 4-14.
1.
Set the display
mask
in
place and secure the snaps beginning with the
four
snaps
in the display supports,
three
snaps in the larger support and one
snap
in the
small support.
2.
Continue along the bottom
of
the display (two snaps), along the sides
(four
snaps) and across the top
(four
snaps).
3.
Secure the cover with two
Ml.Ss:'
silver screws at the display hinges.
4.
Attach the two screw
coven
at each display hinge
to
cover the screws.
4-19
To Next Page
Loading...
