4.14 T1900C LCD Module
Removing
the
Color LCD Module
To
remove the
T1900C's
color
LCD
module, follow the steps below and refer
to
Figure 4-28.
I. Turn
off
the power
to
the T
1900rr
1900C, and,
if
attached, disconnect the AC
adapter, power cord and
all
external cables connected
to
the computer.
2. Remove the battery pack, optional memory card, optional
PCMCIA
card,
top
cover, display mask, display assembly and inverter board as described in Sections
4.2, 4.3, 4.4, 4.5, 4.8, 4.9 and 4.13.
3. Remove
the
Ml.5x6
screw
securing the
LCD
module
to
the
LCD
cover.
4. Carefully rotate
the
LCD
module
from right
to
left
out
of
the display cover and
disconnect the
three
display
cables from the
LCD
module.
LCD
module
•••
Figure
4-28 Removing the
LCD
Module
4-33
To Next Page
Loading...
