Installing
the
T1900C LCD Module
To install the T1900C's LCD module, follow the steps below and refer
to
Figure 4-28.
4-34
I. Connect the
three
display cables
to
the LCD module, and carefully rotate the
LCD module into the LCD cover.
2.
Secure the
Ml.5x6
screw on the LCD module.
3. Install the FL inverter board, display assembly, display mask, top cover, optional
PCMCIA card, optional memory card and battery pack as described in Sections
4.13, 4.9, 4.8, 4.5, 4.4, 4.3 and 4.2.
To Next Page
Loading...
