Installing
the
T1900C FL
Unit
To
install the T1900C's FL unit, follow the steps below and refer
to
Figures 4-29 through 4-
31.
1.
Place the
FL
on
the
FL
unit
and cover the FL using the reflective sheet (Figure 4-
31).
2.
Secure the
LCD
panel
with
four
Mlx4
screws (Figure 4-30).
3. Carefully bend the 16 latches back into place (Figure 4-29).
4.
Install the color LCD module,
FL
inverter board, display assembly, display mask,
top cover, optional
PCMCIA card, optional memory card and battery pack as
described in Sections
4.14,4.13,4.9,4.8,4.5,4.4,4.3,
and
4.2.
4-37
To Next Page
Loading...
