4.17 T1900 LCD Module
Removing the T1900
Liquid
Crystal Display (LCD) Module
CAUTION: The T1900 LCD module is easily damaged Before removing the module,
refer to
Appendix A
for
precautions
on
handling.
To
remove
the
T1900's Liquid Crystal Display Module, follow the steps below and refer
to
Figure 4-34.
4-40
1.
Turn
off
the
power
to
the T1900rr1900C, and, ifattached, disconnect the AC
adapter, power cord and
all
external cables connected
to
the computer.
2. Remove the battery
pack, optional memory card, optional PCMCIA card,
top
cover, display mask, display assembly, and
FL
inverter board as described in
Sections 4.2, 4.3, 4.4, 4,5, 4.8, 4.9 and 4.16.
3. Remove the
two
Ml.S:!.6 screws.
4. Rotate the
LCD
module
out
of
the cover from right
to
left.
5.
Disconnect
the
two
display
cables from
CN!
and
CNl
on
the
LCD
module.
M2.5x6
screws
LCD
module
Figure 4-34 Removing the
LCD
Module
To Next Page
Loading...
