4.18 T1900 Fluorescent Lamp (FL)
Removing the T1900 Fluorescent Lamp
To remove the T1900's Fluorescent Lamp, follow the steps below and refer
to
Figure 4-35.
4-42
1.
Tum
off
the power
to
the T1900ff1900C, and, ifattached, disconnect the
AC
adapter, power cord and
aU
external cables connected
to
the computer.
2.
Remove the battery pack, optional memory card, optional PCMCIA card, top
cover, display mask, FL inverter, and LCD module as described in Sections 4.2,
4.3,4.4,4.5,4.8,4.9,
4.16, and 4.17.
3.
Peel
off
the tape from the lamp cover, then remove
three
Ml.5:13 brass flat-head
screws securing the cover and take
off
the cover.
4. Remove the fluorescent
lamp.
Cover
Fluorescent
lamp
Figure
4-35
Removing
the
Fluorescent
Lamp
To Next Page
Loading...
