Installing the Fluorescent Lamp
To install the T1900's fluorescent lamp, follow the steps below and refer
to
Figure 4-35.
I.
Place the fluorescent lamp in position
in
the LCD module.
2.
Slip the edge
of
the plastic cover under the metal frame and align the holes in the
cover with the corresponding holes in the display assembly cover.
3.
Secure the plastic cover with the
three
Oat-head Ml.5:s3
brass
screws.
4.
Secure the
FL
cable
to
the
LCD
panel with tape as indicated in Figure 4-35.
5.
Install the LCD panel, FL inverter, display assembly, display mask, top cover,
optional
PCMCIA card, optional memory card and battery pack as described in
Sections 4.17, 4.16, 4.9, 4.8, 4.5, 4.4, 4.3 and 4.2.
4-43
To Next Page
Loading...
