3.6
Keyboard
Test
To
execute the Keyboard Test, select 3 from the DIAGNOSTIC TEST MENU, press Enter
and follow the directions displayed on the screen. The Keyboard Test contains subtests that
test the
T1900ff1900C's keyboard actions and mouse connections. Move the highlight bar to
the subtest you want
to
execute and press Enter.
Subtest
01
Pressed key display (82184)
3-12
NOTE: The
Nllm
Lock
and the
Overlay
modes must be
off
to execute this
subtest.
When you execute this subtest, the keyboard layout is drawn
on
the display as
shown below. When any key is pressed, the corresponding key on the screen
changes
to
an
"l1li"
character. Holding a key down enables the auto-repeat
function which causes the key's display character
to
blink.
KEYBOARD
TEST
IN
PROGRESS
301000
•••••••••••••••
••••••••••••
• •
••••••••••••••
•
•
•••••••••••
• •
•
••••••••••
•
••
••
PrtSc
Pause
•
•••••••
[Alt]
+
[SysReq]
[Ctrl]
+
[Break]
to
test
end
If
test
OK,
Press
[Del]
then
[Enter]
Key
To Next Page
Loading...
