3.9 Printer Test
To
execute the Printer Test, select 6 from the DIAGNOSTIC TEST menu, press Enter and
follow the directions displayed
on
the
screen. The Printer Test contains three subtests that test
the
output
of
the printer connected
to
the T1900ff1900C.
NOTE:
An
IBM~ompatible
printer must be connected to the system to execute this
test. Make sure setup option ''External FDDIPRT'
is
set to Printer.
The following message appears when
the
printer test is selected:
Channel#l
XXXXh
Channel
#2
XXXXh
Channel#3
=
XXXXh
Select
the
channel
number
(1-3)
?
The printer
110
port address is specified by the XXXXh number. The T1900ff1900C sup-
ports three printer channels.
Select the printer channel number, and press Enter
to
execute the
selected subtest.
Subtest
01
Ripple Pattern
This subtest prints characters for codes 20h through 7Eh line-by-line while
shifting one character
to
the left at the beginning
of
each new line.
!"'$'&'
()*+,-./0123456789:;<=>?8ABCDBPGHIJKLHNOPQRSTDVNXYZ[\]~_·abcdafgh1jklmno
!"t$'&'()*+,-./0123456789:;<=>?iABCDBPGHIJKLMNOPQRSTDVNXYZ[\]~_·abcdefghijklmnop
··t$'&'()*+,-./0123456789:;<=>?iABCDBPGHIJKLMNOPQRSTOVWXYZ[\]~_·abcdafghijklmnopq
t$'&'()*+,-./0123456789::<=>?8ABCDBPGHIJKLMNOPQRSTUVWXYZ[\]~_'abcdefgh1jklmnopqr
$'&'
()*+,-./0123456789::<=>?iABCDBPGHIJlLMNOPQRSTUVMXYZ[\]~_·abcdafghijklmnopqrs
'&'()*+,-./0123456789:;<=>?iABCDBPGHIJKLHNOPQRSTUVWXYZ[\]~_·abcdafghijklmnopqrst
&'
()*+,-./0123456789::<=>?8ABCDBPGHIJILMNOPQRSTDVNXYZ[\]~_·abcdafgh1jklmnopqrstu
·()*+,-./0123456789::<=>?8ABCDEPGHLJXLMNOPQRSTDVNXYZ[\]~_·abcdafghijklmnopqrstuv
()*+,-./0123456789:;<=>?8ABCDBPGHIJILMNOPQRSTUVWXYZ[\]~_·abcdafghijklmnopqrstuvw
)*+,-./0123456789:;<=>?iABCDBPGHIJKLMNOPQRSTOVWXYZ[\]~_·abcdafghijklmnopqrstuvw.x
*+,-./0123456789:;<=>?8ABCDBPGHIJKLMNOPQRSTUVWXYZ[\]~_·abcdafgh1jklmnopqrstuvw.xy
3-23
To Next Page
Loading...
