2. Good track FORMAT
This option formats a specified cylinder and track as a good track.
If
a good
track is formatted as a bad
track, use this option
to
change the track
to
a good
track.
3. Bad track
FORMAT
This option formats a specified cylinder and track as a bad track.
If
a bad
track is detected, use this option
to
label it as a bad track.
4.
Bad track CHECK
This option searches the hard disk for bad tracks by reading data
to
all the
tracks on the hard disk. A list
of
bad tracks is displayed when the program is
complete.
If
an error other than a bad track is detected, the program is
automatically terminated.
3.16.2 Operations
CAUTION:
The
contents
of
the hard disk will
be
erased when this program is ex-
ecuted Before executing
the
junction, transfer the contents
of
the hard disk onto a
floppy
disk(s).
This can
be
done with the Toshiba MS-DOS BACKUP command
See
the Toshiba MS-DOS manual for details.
Select TEST 2 (Hard Disk Format) from the DIAGNOSTIC MENU and press Enter. The
following messages display:
DIAGNOSTICS -
HARD
DISK
FORMAT
VX.XX
1 -
All
track
FORMAT
2 -
Good
track
FORMAT
3 -
Bad
track
FORMAT
4 -
Bad
track
CHECK
9 -
Go
to
TEST
MENU
iJ.~~
:
Select
items,
Enter:
Finish,
Esc:
Exit
To Next Page
Loading...
