4.
Bad track CHECK
This subtest reads the entire disk and displays a list
of
bad tracks. The test is
terminated in case
of
a bad track check error. To initiate the subtest, enter the
drive number at the prompt shown below.
Drive
number
select
(1:#1,
2:#2)
?
Bad tracks will be displayed in the format shown below.
[[cylinder,
head
= 0123
03]]
Press Enter
to
return
to
the Hard Disk Format menu.
NOTE:
After the HDD has been formatted, execute the Toshiba
MS-DOS
FDISK
command to partition the HDD. Next, execute the Toshiba
MS-DOS
FORMAT
com-
mand. Refer to the Toshiba MS-DOS manual
for
more information about using these
commands.
3-41
To Next Page
Loading...
