Toshiba T1900 Series - Page 91

2. FORMAT program
(1) Selecting FORMAT displays the following message:
DIAGNOSTICS - FLOPPY DISK FORMAT : VX.XX
Drive number select (l:A, 2:B) ?
(2) Select a drive number to display the following message:
TYPe select (O:2DD-2DD,1:2Dl-2D,2:2D-2HD,3:2HD-2HD) ?
(3) Select a media/drive type number and press Enter. A message similar to
the one below
will be displayed:
Warning : Disk data will be destroyed.
Insert work disk into drive A:
Press any key when ready.
(4) Remove the Diagnostics Disk from the FDD, insert the work disk, and
press any key.
The following message
will be displayed when the FDD format is ex-
ecuted:
[FDD TYPE]
[FDD TYPE]
[FDD TYPE]
Format start
TRACK = XXX
HEAD X
SECTOR XX
[[track, head = XXX X]]
After the floppy disk is formatted, the following message appears:
Format complete
Another format (1:Yes/2:No) ?
(5) Typing 1 displays the message from Step (3) above; typing 2 returns the
display screen
to the DIAGNOSTIC MENU.
3.
COPY program
(1) When
COpy is selected, the following message appears:
FLOPPY DISK FORMAT & COpy : VX.XX
Type select (O:2DD-2DD,1:2D-2D,2:2D-2HD,3:2HD-2HD)?
(2) Selecting a media/drive type number will display a message similar to the
one below:
Insert source disk into drive A:
Press any key when ready.