Appendix A Handling the LCD Module
Precautions for Handling the T1900/T1900C LCD Module
The T1900/T1900C’s LCD module can be easily damaged during assembly or disassembly.
Therefore, please observe the following precautions when handling the LCD module.
1. When installing the LCD module in the LCD cover, be sure to seat it so that it is
properly aligned and maximum visibility of the display is maintained.
2. Be careful to align the holes at the four corners of the LCD module with the
corresponding holes in the LCD cover before securing the module with screws.
Do not force the module into place, because stress can affect its performance.
Also, the panel’s polarized surface is easily scarred, so be careful when hand-
ing it.
To Next Page
Loading...
