3.22.5 The Factory Preset Configuration
When you access SETUP, the current configuration is displayed.
1. To show the factory preset configuration, press Home.
2. To accept the default settings, press End and then press Y.
3.22.6 SETUP Options
The SETUP screen is divided into functionally related groups. This section describes each
group and its options.
1. Memory
This group of options lets you configure the computer’s memory.
(1) Total
This field displays the total amount of memory installed and is automati-
cally calculated by the computer. This value cannot be changed.
(2) Base
This field displays the amount of base (conventional) memory–640 KB–
and is automatically calculated by the computer. This value cannot be
changed.
(3) Extended Memory
This field displays the amount of extended memory the computer has
available. This value is calculated automatically when modifications are
made to the Hard Ram value.
(4) Hard RAM
This field displays the amount of extended memory assigned to Hard
RAM. You can set the size of Hard RAM from 128 KB to 19,712 KB in
64 KB increments. The default is 0 KB.
(5) Shadow BIOS ROM
The SETUP program displays 128 KB of RAM, which is reserved for the
Shadow BIOS ROM. This value cannot be changed.
To Next Page
Loading...
