T2150 Series
3.23.2 Accessing the SETUP Program
Selecting 0 from the DIAGNOSTICS MENU and pressing Enter displays the following:
↑↓→← : Select items; Space, BkSp : Change values
Esc: Exit without saving; Home: Set default values; End: Save changes and Exit
NOTES: 1. The T2150CDS comes with standard 4096KB of memory. The
"MEMORY total" item displays the actual memory installed.
2. The "Panel Power On/Off" item appears only when the
T2150 series computer is in Resume mode.
3. The "Battery Level" option appears only when the system
cannot detect the battery charge. For example, when the battery is
replaced.
Changing Values in the SETUP Menu
1. Press ← and → to move between the two columns. Press ↑ and ↓ to move
between items in a column.
2. Press either the space bar or BkSp to change the value.
Accepting Changes and Exiting SYSTEM SETUP Window
1. Press End to accept the changes you made.
If the changed item does not require the system to reboot, the following message is
displayed:
Are you sure? (Y/N)
Serial Port = COM1 (IRQ4/3F8H)
Parallel Port = LPT1 (378H)
Sound System = Address/IRQ/DMA
Power-up Mode = Resume
CPU Cache = Enabled
Processing Speed = High
Alarm Volume = High
System Beep = Enabled
Panel Power On/Off = Disabled
Alarm Power On = Disabled
Keyboard = Layout/Fn
Pointing Devices = Auto-selected
Boot Priority = FDD→HDD
BIOS version = x.xx
SYSTEM SETUP
I/O PORTS
OTHERS
MEMORY
DISPLAY
Display Adapter = VGA compatible
LCD Display Mode = Color
Ext.Scan Mode = Interlace
LCD Display Colors= 256Kcolors
Power On Display = Internal/External
Text Mode Stretch = Enabled
Battery Save Mode = Full Power
Battery Level = E ??? F
BATTERY
HDD Mode = Enhanced IDE (Normal)
HARD DISK
PASSWORD
Not Registered
Total = 8192 KB
Base = 640 KB
Extended = 7360 KB
Shadow BIOS ROM = 192 KB
To Next Page
Loading...
