T2150 Series
4.4 Optional PCMCIA Card
Removing an Optional PCMCIA Card
To remove an optional PCMCIA card from the T2150 series, follow the steps below and refer
to figures 4-7 and 4-8.
1. Turn off the power. Disconnect the AC power card and all external cables con-
nected to the T2150 series.
2. Remove the battery pack as described in section 4.2.
3. Pull open the slot cover (figure 4-7).
Figure 4-7 Opening the PCMCIA slot’s Cover
4. Press the eject button to pop the card out slightly, then remove it (figure 4-8).
Figure 4-8 Removing the PCMCIA card
To Next Page
Loading...
