T2150 Series
Installing an Optional PCMCIA Card
To install an optional PCMCIA card in the T2150 series, follow the steps below and refer to
figure 4-9.
1. To install a PCMCIA card, carefully insert the card, making sure the card is right
side up and the contact surface is inserted first (figure 4-9).
2. When the card is almost fully seated, you will feel some resistance. Press gently to
assure a firm connection, but do not force the card into position.
3. Close the slot cover.
Figure 4-9 Installing the optional PCMCIA card
4. Install the battery pack as described in section 4.2.
To Next Page
Loading...
