T2150 Series
8. Remove one M2.4x4 screw on the sound board, then lift board slightly and pull
to the right to remove it.
Figure 4-13 Removing the sound board
9. Remove two M2.5x8 silver screws from the HDD and remove the HDD bracket,
left side cover, and palm rest cover-support (figure 4-14).
10. Slide the HDD to the left to disconnect the HDD connector (figure 4-14).
Figure 4-14 Removing the HDD with bracket
11. Lift the HDD out of the system unit.
To Next Page
Loading...
