Toshiba T2150 series - 4.16 T2150 CDT Liquid Crystal Display (LCD) Module; Removing the T2150 CDT Color LCD Module

4-40
T2150 Series
4.16 T2150CDT Liquid Crystal Display (LCD) Module
Removing the T2150CDT Color LCD Module
To remove the T2150CDT’s color LCD module, follow the steps below and refer to figure
4-30.
1. Turn off the power to the T2150CDT. Disconnect the AC power cord and all
external cables connected to the T2150CDT.
2. Remove the battery pack, optional memory module, optional PCMCIA card,
display mask, and FL inverter board as described in sections 4.2 through 4.4, 4.11,
and 4.15.
3. Remove four M2.5x6 screws with ground cable securing the LCD module to
the LCD cover (figure 4-30).
4. Carefully rotate the LCD module from left to right out of the display cover and
disconnect the display cable from the LCD module (figure 4-30).
Figure 4-30 Removing the LCD module
CAUTION: Metal edges on the LCD module are sharp, so be careful not to cut
yourself.