- viii -
RATING labels that will be found on the equipment are shown below:
Note:
The above labels are shown blank. The labels affixed to the equipment will be filled in with rating data
specific to the actual unit(s) furnished. Complete rating data is also provided on the rating sheet included
in the supplementary drawing packet. Ensure that all rating data matches the power system and the
driven load connected to the equipment.
Input Controller Rating Label
Note: If no input controller is
supplied, this label will not be
present. Refer to label on upstream
equipment for rating data.
Adjustable Speed Drive Rating Label
Inverter Power Module Rating Label
To Next Page
Loading...
