T3400, T3400CT
4.5 Top Cover
Removal
To remove the top cover, follow the steps below and refer to Figures 4-8 through 4-10.
1. Turn off the power and disconnect the AC adapter, power cord, and all external
cables.
2. Remove the battery pack, optional memory and PCMCIA cards as described in
sections 4.2, 4.3, and 4.4.
3. Remove seven M2.5x8 silver screws from the bottom of the computer and two
M2.5x4 screws from the battery seating area. These screws secure the top cover
to the bottom cover (Figure 4-8).
Figure 4-8 Removing the Bottom Cover Screws
To Next Page
Loading...
