T3400, T3400CT
System Speaker = Enabled
Low Battery Alarm = Enabled
Panel Close Alarm = Enabled
Enabled Enables feature.
Disabled Disables feature.
(f) Panel Power On/Off
Use this option to automatically turn the computer on or off by opening
or closing the display panel. If this feature is enabled when the com
puter is in Resume mode, the system is automatically powered off and
on when the display panel is closed and opened. This option does not
appear when the computer is in boot mode.
Enabled Enables feature.
Disabled Disables feature. (This is the default.)
NOTE: Do not remove the AC adapter and battery pack at the
same time when using this feature, as data saved by AutoResume
will be lost. This option must also be reset.
(g) Alarm Power On
Use this option to set the time for the system to turn on automatically.
This option can be set to expected transmission times for periods of
personal absence. The option does not automatically turn off the
system, and does not appear when the computer is in boot mode.
00:00:00 Sets the power on time (24-hour clock).
Disabled Disables the alarm.
NOTE: Do not remove the AC adapter and battery pack at the
same time when using this feature as data saved by AutoResume will
be lost. This option must be reset when power is restored.
(h) Boot Priority
This option selects disk drive priority for boot up.
FDD → HDD Computer looks for files to boot first on the FDD and
next on the HDD. (This is the default.)
HDD → FDD Computer looks for files to boot first on the HDD and
next on the FDD.
Reverse the order by holding down the F10 key while the computer is
booting. This procedure does not affect the setting.
To Next Page
Loading...
