Toshiba T3400CT - Hard Disk Drive Procedures; HDD Removal Steps

4-14
T3400, T3400CT
4.6 Hard Disk Drive
Removal
To remove the HDD, follow the steps below and refer to Figures 4-11 through 4-13.
1. Turn off the power and disconnect the AC adapter, power cord, and all external
cables.
2. Remove the battery pack, optional memory card, optional PCMCIA card, and top
cover as described in sections 4.2 through 4.5.
3. Remove one M2.5x6 brass screw securing the HDD bracket to the bottom cover
(Figure 4-11).
4. Disconnect the HDD flexible cable from PJ5 on the system board. (Figure 4-11).
5. Lift out the HDD (Figure 4-11).
Figure 4-11 Removing the HDD and Bracket