Toshiba T3400CT - Keyboard Installation Steps

4-26
T3400, T3400CT
4. Remove three M2.5x6 brass screws at the front of the keyboard and lift out.
Figure 4-20 Removing the Keyboard Screws
Installation
To install the keyboard, follow the steps below and refer to Figures 4-19 and 4-20.
1. Seat the keyboard (Figure 4-20).
2. Secure three M2.5x6 brass screws at the front of the keyboard (Figure 4-20).
3. Seat the plastic panel and press firmly to secure the latches (Figure 4-19).
4. Replace the top cover, optional PCMCIA card, optional memory card, and battery
pack as described in sections 4.5 through 4.2.