Toshiba T3400CT - LED Board Procedures; LED Board Removal Steps

T3400, T3400CT
4-27
4.12 LED Board
Removal
To remove the LED board, follow the steps below and refer to Figure 4-21.
1. Turn off the power and disconnect the AC adapter, power cord, and all external
cables.
2. Remove the battery pack, optional memory card, optional PCMCIA card, and top
cover as described in sections 4.2, 4.3, 4.4, and 4.5.
3. Remove the M2.5x4 brass screw securing the LED board (Figure 4-21).
4. Using a thin object to release the two latches on the top cover, pull up gently on
the LED holder and remove it.
5. Lift out the LED board.
Figure 4-21 Removing the LED Board