Toshiba T3400CT - TFT Color Display Module Procedures; TFT Color Display Module Removal Steps

4-38
T3400, T3400CT
4.17 TFT Color Display Module
Removal
To remove the TFT color display module, follow the steps below and refer to Figures 4-29
and 4-30.
1. Turn off the power to the computer and disconnect the AC adapter, power cord,
and all external cables.
2. Remove the battery pack, display mask, and FL inverter board as described in
sections 4.2, 4.13 and 4.14.
3. Remove four brass M2x6 screws at each corner of the display module. The screw
at the bottom right corner also secures the ground cable (Figure 4-29).
4. Note the ground and display cable routing, then rotate the display module out of
the display cover from left to right (Figure 4-29).
Figure 4-29 Removing the Display Module Screws