Toshiba T3400CT - PS;2 Mouse Connection Test

T3400, T3400CT
3-13
Subtest 02 Pressed key code display
When a key is pressed, the scan code, character code, and key top name are
displayed on the screen in the format shown below. The Ins, Caps Lock,
Num Lock, Scroll Lock, Alt, Ctrl, Left Shift, and Right Shift keys are
displayed in reverse screen mode when pressed. Scan codes, character codes,
and key top names are shown in Appendix E.
KEYBOARD TEST IN PROGRESS 302000
Scan code =
Character code =
Keytop =
Ins Caps Lock Num Lock Scroll Lock
Alt Ctrl Left Shift Right Shift
PRESS [Enter] KEY
Subtest 03 PS/2 mouse connect check
NOTE: A PS/2 mouse must be connected to the computer to execute the connect
check .
This subtest determines if a PS/2 mouse is connected or not.
If no error is detected, it returns to the subtest menu.
If an error is detected, the following message appears:
KBC - MOUSE INTERFACE ERROR
[[ HALT OPERATION ]]
1: Test end
2: Continue
3: Retry
Subtest 04 Pointing Stick Check
NOTE: To execute the pointing stick check, mouse driver software must be in-
stalled in the system.
This subtest checks pointing stick functions.
If no error is detected, it returns to the subtest menu.