T3400, T3400CT
(c) Ext. FDD/PRT
Use this option to assign a printer/FDD port function.
Printer Configures the port for output to a printer or other
parallel device. (This is the default.)
FDD A Configures the port for output and input to and from the
external 5.25-inch diskette drive and assigns the letter A
to the external drive. The internal drive becomes drive B
by default.
FDD B Configures the port for output and input to and from the
external 5.25-inch diskette drive and assigns the letter B
to the external drive. By default the internal drive
remains drive A.
Option Setting External FDD ID Internal FDD ID
Printer (default) None A
FDD A A B
FDD B B A
(d) Printer Port Type
This option sets the communication mode for the printer/FDD port to either
output-only or bi-directional. It is effective only when the Ext.FDD/PRT
option is set to printer. If FDD is selected, this setting is ignored and the
mode is set to bi-directional. For most printers, the port should be set to
Output. With some other parallel devices, the setting should be Bi-direc-
tional.
Output Activates uni-directional operation.
(This is the default)
Bi-directional Activates bi-directional operation.
4. Hard Disk
This option enables or disables the HDD.
120 MB The hard disk can be accessed. Disk capacity is automatically
displayed and cannot be changed.
No Drive The hard disk cannot be accessed.
To Next Page
Loading...
