Toshiba T4900CT - Floppy Disk Drive

T4900CT
4-33
4.13 Floppy Disk Drive
Removing the Floppy Disk Drive
To remove the T4900CT’s floppy disk drive, follow the steps below and refer to figures 4-32
and 4-33.
1. Turn off the power to the T4900CT. Disconnect the AC adapter, power cord, and
all external cables connected to the T4900CT.
2. Remove the battery pack, optional memory card, optional PCMCIA card, HDD
pack, top cover, keyboard, status indicator panel, backup battery and microphone,
display assembly, upper system board, power supply board, and base assembly as
described in sections 4.2 through 4.12.
3. Disconnect the FDD cable from PJ304 of the lower system board and remove the
tape (figure 4-32).
Figure 4-32 Disconnecting the FDD cable