Toshiba T5200 - Replacing the Hard Disk Drive (HDD)

support (L)
<fig id=MMS\5200\52004_10.TIF>Figure 4-17</fig> Removing the battery
6. To install the fan, the LED board and the battery, follow the above
procedures in reverse.
~~
DOC:MAINTENANCE MANUAL
MODEL:T5200
MODEL:T5200C
CHAP:4 REPLACEMENT PROCEDURES
SECT:4.5, REMOVING/REPLACING THE DISK SUPPORT
DOC_ID:4.5 T5200
LANG:ALL
TEXT:
<fig id=MMS\5200\52004_11.TIF>Page 4-11</fig>
4.5 REMOVING/REPLACING THE DISK SUPPORT
1. Remove the top cover as directed in section 4.3 to disconnect the
three connectors PJ601, PJ701, PJ702 (A) from the LED boards (B).
<fig id=MMS\5200\52004_11.TIF>Figure 4-18</fig> Disconnect the three
connectors
2. Remove the clear cover (C).
3. Remove the two screws (D) from the disk support (E) to lift up the
disk support, then disconnect the five connectors PJ3, PJ5, PJ6,
PJ9, PJ13 (F) from the system board (G).
4. Remove the disk support.
<fig id=MMS\5200\52004_11.TIF>Figure 4-19</fig> Removing the disk
support
5. To install the disk support, follow the above procedures in
reverse.
~~
DOC:MAINTENANCE MANUAL
MODEL:T5200
MODEL:T5200/100
MODEL:T5200/200
MODEL:T5200C
CHAP:4 REPLACEMENT PROCEDURES
SECT:4.6, REMOVING/REPLACING THE HDD
DOC_ID:4.6 T5200
LANG:ALL
TEXT:
<fig id=MMS\5200\52004_12.TIF>Page 4-12</fig>
4.6 REMOVING/REPLACING THE HDD
1. Remove the disk support as directed in section 4.5.