Central Remote Controller Installation Manual
19
-EN
To change the Central control address
1 Select "Obtain Address" on the "Address Settings"
screen and press [ ] (Confirm)
The "Obtain Address" confirmation screen appears.
2 Press [˄] and [˅] to select "Yes", then press [ ]
(Confirm)
"Obtaining address... " appears, and after a while, the "Indoor unit list"
screen appears.
• This operation will take several minutes.
• On the "Obtain Address" confirmation screen, press [ ] (Return) or
select "No" and press [ ] (Confirm) to return to the "Address Settings"
screen.
3 Press [<] [˄] [˅] [>] to select the indoor unit whose
Central control address you want to change, then
press [ ] (Confirm)
The "Central control address list" screen appears.
• In the screen, black is "cursor" and grey is "assigned Central control
address".
• The Central control address can be set within the following range.
Models that support TU2C-LINK: 1 to 128
Models that do not support TU2C-LINK: 1 to 64
Indoor unit list screen
Central control address list screen
4 Press [<] [˄] [˅] [>] to select the Central control
address, then press [ ](Confirm)
Return to the "Indoor Unit List" screen.
5 After changing the Central control address, press
[ ] (Return) on the "Indoor Unit List" screen
The "Address Confirm" confirmation screen appears.
6 Press [˄] and [˅] to select "Yes", then press [ ]
(Confirm)
"Registering the address... " → "Obtaining address... " appears and
the display returns to the "Indoor Unit List" screen.
• This operation will take several minutes.
• Select "No" and press [●] (Confirm) to return to the "Servicing Menu"
screen without registering the changed address.
7 Check that the displayed address is the address
changed in steps 3 to 4, and press [ ] (Return)
The "Address Confirm" confirmation screen appears.
8 Press [˄] and [˅] to select "Yes", then press [ ]
(Confirm)
After the "Address Settings " screen, return to the "Servicing Menu"
screen.
This completes "Obtain Address".
• This operation will take several minutes.