Toshiba TCB-SC640U-E - Setting the Operating Schedule

Central Remote Controller Installation Manual
24
-EN
Daylight-saving
Temperature Display Conf.
 Temp. Unit
 Temp. Increments
Changing the Display Method (Display settings)
1 On the "Servicing Menu" screen, select "Display
settings" then press [ ] (Confirm)
The "Display settings" screen appears.
2 Select an item with [˄] and [˅] then press [ ]
(Confirm)
The screen for the selected item appears.
1 On the "Display settings" screen, select
"Daylight-saving" then press [ ] (Confirm)
The "Daylight-saving" screen appears.
2 Select "Enable" or "Void" using [˄] and [˅] then
press [ ] (Confirm)
Press [ ] (Return) to return to the "Display settings" screen.
• When "Void" is set, the clock setting "Daylight-saving" is hidden.
1 On the "Display settings" screen, select
"Temperature Display Conf." then press [ ]
(Confirm)
The "Temperature Display Conf." screen appears.
2 Press [˄] and [˅] to select the item, then press [ ]
(Confirm)
The screen for the selected item appears.
3 Press [˄] and [˅] to select the temperature unit, then
press [ ] (Confirm)
The temperature unit is set.
• Press [ ] (Return) to return to the "Temperature Display Conf." screen.
• The Air to Water Heat Pump cannot display temperature in Fahrenheit.
3 Press [˄] and [˅] to select the temperature
resolution, then press [ ] (Confirm)
The temperature resolution is set.
• Press [ ] (Return) to return to the "Temperature Display Conf." screen.
• The Air to Water Heat Pump cannot display temperature as 0.5 °C.