Central Remote Controller Installation Manual
5
-EN
■ Component Names
■ Before Installation
Confirm that all the parts listed below are included in the package.
Included items
Wiring specifications
Use the following wiring material to connect signal wires and power supply wires. (Locally procured)
Name Functions
Terminal block for external contact output Connect the external contact output
Terminal block for external contact input Connect the external contact input
Uh / U3U4 terminal block Connect the central control wiring
No. Component name Q'ty Remark
1
Central Remote Controller main unit
1
2
Owner's Manual 1
3
Installation Manual 1
4
Fixing screw
4
M4×20
5
Fixing screw
4
M3.8×16
No. Wiring Wire type / wire diameter / wire length
1
For Uh / U3U4 terminal Refer to "Design of Control Wiring" (P.8~P.11).
2
For power supply
0.75 mm
2
, up to 50 m
3
For digital I/O
2-core cable
0.3 mm
2
, up to 100 m
Terminal block for external
contact input
Terminal block for external
contact output
Uh / U3U4 terminal block
To Next Page
Loading...
