Toshiba TCB-SC640U-E - Daylight-saving

Central remote controller Owner’s Manual
18
-EN
Daylight-saving
 Shift time
 Start date / End date
Example: Start date
1 In the “Settings Menu” screen, select “Clock” and then press
[ ] (Confirm).
The “Clock setting” screen is displayed.
2 Select “Daylight-saving” using [∧] and [∨], and then press [ ]
(Confirm).
The “Daylight-saving” screen is displayed.
1 In the “Daylight-saving” screen, select “Shift time” and then
press [ ] (Confirm).
The “Shift time” screen is displayed.
2 Select “ON” or “OFF” using [∧] and [∨], and then press [ ]
(Confirm).
If “ON” is set and the time set in “Start date” is reached, the clock is
advanced by 1 hour.
When the time set in “End date” is reached, the clock is restored to the
original time.
• If you press [ ] (Return), the “Daylight-saving” screen is displayed
again.
• During the “Daylight-saving” period, is displayed above the
clock.
1 In the “Daylight-saving” screen, select “Start date” and then
press [ ] (Confirm).
The “Start date” screen is displayed.
2 Move the cursor using [<] and [>], change the month, day, and
time using [∧] and [∨], and then press [ ] (Confirm).
The “Daylight-saving” screen is displayed again.