Central remote controller Owner’s Manual
21
-EN
If necessary, set the temperature, operation mode (Cool/Heat, etc.), fan speed, and louver. (P.23)
Start/Stop Operation of All air conditioners in a Zone
1 Display the “Zone” screen. (P.15)
2 Press [∧] [∨] [<] [>] to select a Zone.
The selected Zone is highlighted.
To start
3 Press [ ].
The confirmation screen is displayed.
4 Press [∧] [∨] to select “Yes”, then press [ ] (Confirm).
All air conditioners in the selected Zone start operation and
changes to .
To stop
3 Press [ ].
The confirmation screen is displayed.
4 Press [∧] [∨] to select “Yes”, then press [ ] (Confirm).
All air conditioners in the selected Zone stop operation and
changes to .