Toshiba TCB-SC640U-E - Changing the Operating Schedule (Operating Sch Enable;Void and Operating Sch settings)

Central remote controller Owner’s Manual
41
-EN
● NOTE
• Set the clock before setting the schedule.
• If the Operating Schedule or Energy Saving Schedule is enabled, is displayed above the clock.
• If no indoor unit is set for the zone, the schedule cannot be set.
• Schedule settings do not take effect in the following cases.
The clock is blinking (not set), the target zone is set to Void in “Operating Sch Enable/Void”, or Void is set in the “Weekly
display” screen.
Operating Sch Enable/Void
Changing the Operating Schedule (Operating Sch Enable/Void and
Operating Sch settings)
Changing the details of the Operating Schedule settings
1 In the “Settings Menu” screen, select “Schedule settings” and
then press [ ] (Confirm).
The “Schedule settings” screen is displayed.
2 Select “Operating Sch Enable/Void” using [∧] and [∨], and
then press [ ] (Confirm).
The “Select Zone” screen is displayed.
3 Select the zone to change using [<], [∧], [∨], and [>], and then
press [ ] (Confirm).
The “Enable/Void setting” screen of the selected zone is displayed.
• The current setting is displayed in < >.
4 Select “Enable” or “Void” using [∧] and [∨], and then press
[ ] (Confirm).
The selected item is set.
• If you press [ ] (Return), the “Select Zone” screen is displayed
again.