Toshiba TCB-SC640U-E - Sensitivity Adjustment

Central remote controller Owner’s Manual
61
-EN
 When “ON” is set for Button Long Press Settings
If you set “ON”, set the long press time as well.
Sensitivity Adjustment
1 Display the “ON butt. long press” screen (Steps 1 and 2 of
“Button Long Press Settings” (P.60)).
2 Select “Long press time” using [∧] and [∨], and then press [ ]
(Confirm).
The “ON long press time” screen is displayed.
3 Select the number of seconds (1 to 5 seconds) using [<] and
[>], and then press [ ] (Confirm).
The selected number of seconds is set as the ON long press time.
• If you press [ ] (Return), the “ON butt. long press” screen is
displayed again.
1 In the “Settings Menu” screen, select “Button Settings” and
then press [ ] (Confirm).
The “Button Settings” screen is displayed.
2 Select “Sensitivity Adjustment” using [∧] and [∨], and then
press [ ] (Confirm).
The “Sensitivity Adjustment” screen is displayed.
3 Move using [<] and [>], and then press [ ] (Confirm).
The adjusted sensitivity is set.
• If you press [ ] (Return), the “Button Settings” screen is displayed
again.